BK Resources BKF-8W Lead Free Standard Duty Commercial Faucet
BK Resources has manufactured an 8" standard duty splash mount faucet to be in compliance with the Reduction of Lead in Drinking Water Act, slated to take effect in 2014.
- Lead free standard duty faucet
- 1/4 turn ceramic cartridge
- Available with 6, 8, 10, 12, 14, 16, or 18" faucet
- Splash/wall mount, 8" C/C
BK Resources is a leading manufacturer of stainless steel tables, sinks, equipment stands, ware washing, and components. If the type of equipment you need is for food preparation in a commercial kitchen and is made of stainless steel then there is a good chance that you can buy it from BK Resources. Incorporating environmental conscientious technology in the manufacturing and design of the equipment they produce, BK Resources provides a wide range of lead free and low flow faucets.
BK Resources BKF-8W Lead Free Standard Duty Commercial Faucet is rated out of 5 by 5.
Rated 5 out of 5 by Nursecallurgent from High quality, good price For a busy restaurant, good quality, easy to install, excellent value.
Date published: 2015-05-13
Rated 1 out of 5 by Disapointed from Quality not so good. Ordered for our prep sink along with the installation kit. Installation kit was defective, 90 degree fitting had tiny holes in it that leaked. After replacing and hooking up the body of the faucet had a pin hole that was leaking. Had to go to local hardware store and find a replacement. Will be returning.
Date published: 2015-05-25
Rated 1 out of 5 by slopoketom from You cannot make any repair to faucet.trash BK faucets are terrible.We had a fairly new one and the faucet started to drip.When we tried to change washer or replace stem,the brass nut just fell apart.Could not get stem out and we had to replace the entire faucet.So forget about ever trying to repair the faucet.Trash.
Date published: 2015-05-05
Rated 1 out of 5 by Joe V from Poorly Finished This unit came with a sink, both were not shipped on time and poorly made. Would not recommend the product, company or the distributor
Date published: 2015-09-07
Rated 5 out of 5 by bobc from great service Bought this to replace worn out faucet fit perfectly
Date published: 2015-04-02
Is the end of the faucet unscrew so that I could remove it to attach an adapter (one to which I could connect a hose)?
Yes, the end of this faucet does unscrew. However, it's not designed to have a hose connected to it, so I'm not sure if it would work for your purposes or not.
Date published: 2014-04-15
Do you sell a washer rebuild kit.
No, we do not carry rebuild kits. If you hare having issues with your faucet, it is best to contact BK Resources directly (888-310-4393) and they can usually find the part numbers that you need. With those part numbers we can set up a special order.
Date published: 2014-04-24
HOW DO WE SECURE IT TO WALL. DO WE NEED TO BUILD A CABINET?
The sinks and faucets are designed to be freestanding and anchoring to the wall is generally not required. Please confirm your local health code requirements. Note also that a faucet mounting kit such as the BK-DMMK-90 is necessary to fit the faucet to your pipes: http://primasupply.com/equipment/bk-resources/bk-dmmk-90
Date published: 2014-10-06
what is the flow rate of this faucet
The maximum flow rate for this faucet is two gallons per minute.
Date published: 2015-03-23
What is the distance between the mounting area of the hot water faucet the cold water faucet?
The faucet is 8" wide.
Date published: 2015-04-28