BK Resources BK-DMMK-90 - Splash or Deck Mount Faucet Mounting Kit

BK Resources Splash Mount Commercial and Standard Faucet Mounting Kit BK-DMMK-90

* Image is a representation. Actual product may vary based on model, size, and options selected.



The BK-DMMK-90 is an install kit for splash mount faucets or deck mount faucets (for deck mount sinks, just use the kit without the 90 degree elbows). This kit secures the faucet to the backsplash of your sink and presents male-threaded supply nipples for easy attachment of compression fittings.

Installation Kit Includes:
  • (2) 1/2" supply nipples
  • (2) Retainer nuts
  • (2) Lock washers
  • (2) Rubber washers
  • (2) Male and female short elbows

*Image is a representation. Actual product may vary based on model, size, and options selected.

Manufacturer: BK Resources
Model: BK-DMMK-90


BK Resources is a leading manufacturer of stainless steel tables, sinks, equipment stands, ware washing, and components. If the type of equipment you need is for food preparation in a commercial kitchen and is made of stainless steel then there is a good chance that you can buy it from BK Resources. Incorporating environmental conscientious technology in the manufacturing and design of the equipment they produce, BK Resources provides a wide range of lead free and low flow faucets.


BK Resources BK-DMMK-90 - Splash or Deck Mount Faucet Mounting Kit is rated 4.0 out of 5 by 3.
Rated 4 out of 5 by from Very good quality but was it BKR? This kit contained top quality parts and I had it installed leK free in my commercial sink quickly. Some thoughts though... My understanding is that the BK Resources elbow had "BKR" cast in it and these did not. I also would have preferred a nut built into the elbow so that an adjustable wrench could have been used. If your not a pro, make sure you have a pipe wrench available. Also, the BKR site has installation instructions.
Date published: 2015-03-25
Rated 3 out of 5 by from Supply nipple was too long for my installation. I have no issue with the price on this - if you go to the box store and price brass fittings things fall into line just fine. But the chrome plated supply nipple should be a shorter coupling. There is no way to get a wrench on it without messing up the threads and it is about an inch too long to fit onto the commercial sink I purchased from Prima - when you put it all together the brass elbow sticks out an inch past the splash and you will never get the sink close to the wall. I ended up using a thin cut off wheel to shorten it and made it work (it's brass so it cut easily and cleanly). Plumbing is never cut and dry, but this kit should include a shorter pair of supply nipples with a hex center. The question posted was posted earlier by me and this was my solution. I would recommend this product IF you have means to shorten the supply. Prima still ranks high in my opinion.
Date published: 2014-08-03
Rated 5 out of 5 by from Just what you need. This is a complete kit to mount your stainless steel faucets. Buy it when you order your primasupply faucet because you will not find this at the big box stores and plumbing supply houses are more expensive.
Date published: 2014-03-12
  • 2015-04-01T08:04CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_28555, PRD, sort_relevancy
  • clientName_prima


Just got my order, but there is no diagram. Does the stamped washer go on the back side of splash? And then rubber washer and retainer nut on the front? For an 18 gauge stainless sink will there be a lot of threaded nipple showing on the front?

Asked by: Dale
Please see the "Mounting Instructions" document under the "Specs" tab for detailed installation info.
Answered by: JoshR
Date published: 2014-08-05
  • 2015-04-01T07:33CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_28555, PRD, sort_mostAnsweredQuestionsFirst
  • clientName_prima