BK Resources BK-GT-50 Grease Trap - 50 lbs - 25 gpm

Contact us for expedited shipping options.

In a Hurry? Check Out these Key Benefits!

• 50 lbs. capacity grease trap with a flow rate of 25 gal. per minute.
• Designed for removing and isolating fat, oil, and grease from wastewater whereever food is prepared.
• Constructed of 11 gauge carbon steel with a corrosion resistant coating.
• Main body of the grease trap is suspended above the floor to avoid corrosion and extend the life of the unit.

Please remember that health code regulations vary by location. Always refer to your local municipality when determining the proper capacity and placement of grease trap for your food service establishment.

Why Grease Traps?

The EPA has noted that grease from restaurants and industrial resources are the primary cause of sewer line blockages. As fats, oils, and greases enter the main sewage system, they cool and congeal, effectively clogging sewage lines. Once a sewage line clogs, it can quickly lead to overflows and backups that can not only result in major property damage to your store or restaurant, but can also contaminate local bodies of water. By ensuring the proper grease trap is installed in the plumbing systems of your food service establishment, you can avoid these hazardous situations and the frustrating service and repair calls that would come with them. Not to mention, the inclusion of a grease trap in your kitchen will help you pass routine health inspections with flying colors.

How Do They Work?

Overall, the grease trap is a simple, yet extremely efficient system. A flow valve attaches to the inlet valve at the front of the grease trap. This slows the flow rate of the water and grease entering the trap, ensuring the water and oil will have enough time to separate before the water is pushed out the other end of the unit. As the water enters the grease trap, it immediately hits a baffle which forces the water down and agitates it. After the water and grease reach the bottom of the trap, the fats, oils, and greases will separate from the water, rising to the top of the trap, leaving the cleaner water at the bottom with a protector around it. An air relief valve is also built into the unit to prevent the development of vacuum pressure within the trap, also negatively affecting the flow rate of the water and limiting the removal of grease from it. Once the oil has separated, the grease-free water will flow out of the grease trap.

The BK-GT-50

Grease traps range in capacity from 8 lbs. to 100 lbs. Built from 11 gauge carbon steel with a corrosion resistant coating, the BK Resources BK-GT-50 has a grease capacity of 50 lbs. and a will allow 25 gallons of water flow through the trap per minute. For more information about what size grease trap you need for your kitchen and the various parts of a grease trap check out these two videos below.

Grease Trap Parts

Grease Trap Sizing*

Please bear in mind that the guidelines provided in this video may differ from the requirements of your local municipality. Always adhere to the health code regulations set by your county.

Tracking Your Grease Trap Cleanings.

If you are looking for an efficient way to track grease trap cleanings for your kitchen, we have created a grease trap cleaning log to help you out. Use this to help track cleaning dates, who cleaned the trap, and how much grease was removed. Plus, it allows space for you to record any comments or concerns that may assist the next employee to clean the grease trap later on. You can download your Grease Trap Cleaning Log here.

What's in the Box?

• (1) BK-GT-50 grease trap
• (1) Flow control T-valve
• (1) Instruction manual

Standard Features:

• 50 lbs. capacity grease trap with a flow rate of 25 gal. per minute.
• Designed for removing and isolating fat, oil, and grease from wastewater whereever food is prepared.
• Constructed of 11 gauge carbon steel with a corrosion resistant coating.
• Main body of the grease trap is suspended above the floor to avoid corrosion and extend the life of the unit.
• Non-skid deck plate.
• Removable baffles for ease of maintenance.
• No hub connectors.
• Flow control T-vent provided.

Commercial Warranty:

All BK Resources products come with a standard one (1) year Manufacturer's Warranty against any defects unless otherwise noted in BK Rsources' Plumbing Division Full Line Catalog.