True TDD-4-HC Kegerator Direct Draw Beer Dispenser - 4 Kegs

Contact us for expedited shipping options.

In a Hurry? Check Out These Key Benefits!

• True's solid swing three-door direct draw beer dispenser holds four 1/2 barrel kegs.
• Two 3 in. diameter stainless steel insulated beer columns into which cold air is directed, reducing foaming and maximizing draft beer profits.
• Environmentally friendly hydrocarbon refrigerant has zero ozone depletion potential and minimal contribution to global warming.
• Patented reversing condensing fan motor keeps the condenser coil clean, reducing energy consumption by as much as 20%, extending the lifespan of the compressor, and providing accurate temperatures.
• High capacity, factory balanced refrigeration system maintains cabinet temperatures of 33° - 38°.
• Direct Draw beer dispenser comes completely pre-wired and ready for one final connection to a 115/60/1 phase, 15 amp dedicated outlet.

True Manufacturing's line of TDD Direct Draw Beer Dispensers combine two of this manufacturer's top priorities: value and enduring quality. The largest of this product series, the TDD-4-HC Solid Swing Three-Door Direct Draw Beer Dispenser is capable of holding up to four 1/2 barrel kegs at once. The TDD-4-HC comes with two 3 in. diameter stainless steel insulated beer columns into which cold air is directed not only to reduce foaming, but to maximize draft beer profits for your bar. A high capacity, factory balanced refrigeration system that maintains cabinet temperatures of 33° - 38°F and is equipped with an environmentally friendly hydrocarbon refrigerant, eliminating the potential for ozone depletion and limiting the contribution to global warming. Plus, True created this unit with a patented reversing condensing fan motor which keeps the coil of the condenser clean by blowing off dust, dirt, and debris. These features allow for more consistent volumes of air, a longer compressor lifespan, and accurate temperature, reducing energy consumption by as much as 20%. Top all that off with a stylish black powdercoat finish and an easy-to-use triple swing door design that is prewired at the factory for final connection to a 115/60/1 phase, 15 amp dedicated outlet, you can be sure you will have an eye-catching piece of bar and beverage equipment without the hassle of expensive and frustrating servicing and installation.

While a black finish is standard, 20+ additional powder coating color options, as well as a stainless steel option, are available. A brochure with the various color options and additional information can be found under the "Specs" tab on this listing. If you would like to purchase this unit with a stainless steel finish, select from the available color options at checkout. If you are interested in the other powercoating color options, please contact our Customer Service team at sales@primasupply.com for more information and ordering. Upcharges and extended lead times may apply.

True stands behind their American-made products and desires to see your business flourish. That's why they back their entire line of TDD Direct Draw Beer Dispensers with a three year warranty on all parts and labor, and an additional two years of coverage on the compressor. If you are looking for more specifics regarding this warranty, check out the attached warranty document under the "Specs" tab for this product and rest assured that your TDD-4-HC is designed with high-quality materials and built to last.

What's in the Box?

• (1) Solid swing three-door direct draw beer dispenser.
• (2) 3 in. diameter stainless steel insulated beer columns.
• (1) Cord and plug set for a 115/60/1 phase, 15 amp dedicated outlet.
• (1) Instruction manual.

Want More Information?

For more information about the TDD-4-HC, check out these helpful videos below regarding hydrocarbon refrigerant and the reverse condensing fan motor. You can also find a complete list of this unit's innovative features under the "Features" tab on this listing.

Looking for a Comparable Club Top Unit?

True TDD-4CT-HC Club Top Direct Draw Beer Dispenser

Four 1/2 barrel keg capacity.

Check it out

Alternative Models

Standard Features:

• Design and Construction:
  • True's solid swing three-door direct draw beer dispenser holds four 1/2 barrel kegs.
  • No-peel black powder coated cold rolled steel front and sides with a matching aluminum back and stainless steel countertop ensure the finish on the equipment is durable and permanent (stainless steel and additional powdercoating options are available).
  • Stainless steel interior floor with 1/2 in. reinforced lip and heavy gauge galvanized steel walls.
  • Door threshold protector helps to prevent damage to the cabinet from a routine loading of the product.
  • High density, polyurethane insulation is used to foam-in-place the entire cabinet structure, has zero ozone depletion potential and minimal contribution to global warming.
  • Two 3 in. diameter stainless steel insulated beer columns into which cold air is directed, reducing foaming and maximizing draft beer profits.
  • Welded, heavy duty steel frame rail is black powder coated for protection against corrosion.
  • No-peel black powder coated cold rolled steel swing door with a heavy gauge galvanized steel liner.
  • Each door is fitted with a 12 in. long recessed handle that is foamed-in-place with a sheet metal interlock to ensure permanent attachment. Door locks standard.
  • Magnetic door gaskets of one piece construction are removable without tools for ease of cleaning.
  • Energy efficient interior LED lighting provides bright and even lighting throughout the cooler while producing less heat and decreasing energy consumption.
• Refrigeration System:
  • Environmentally friendly hydrocarbon refrigerant has zero ozone depletion potential and minimal contribution to global warming.
  • Electronically commutated evaporator and condenser fan motors operate at higher peak efficiencies and move a more consistent volume of air, producing less heat and reducing energy consumption.
  • Patented reversing condensing fan motor keeps the condenser coil clean, reducing energy consumption by as much as 20%, extending the lifespan of the compressor, and providing accurate temperatures.
  • Condensing unit accessed from the rear of the equipment for easy cleaning and maintenance.
  • High capacity, factory balanced refrigeration system maintains cabinet temperatures of 33° - 38°.
• Model Features:
  • Epoxy-coated evaporator eliminates the potential of corrosion.
  • Convenient 1/2 in. barbed T drain fitting located on the front of the cooler.
  • Designed to accommodate all types of beer kegs.
  • Comes standard with a two-way tapper manifold.
• Electrical:
  • Direct Draw beer dispenser comes completely pre-wired and ready for one final connection to a 115/60/1 phase, 15 amp dedicated outlet.

Commercial Warranty:

• Three year warranty on all parts and labor.
• Additional two year warrany on the compressor.

†Depth does not include 1 in. for rear bumpers.

*Height does not include 15 3/4 in. for draft arms.