Video Overview | De-Scaling And Sanitizing In Ice-O-Matic Elevation Series Ice Makers
When it comes to ice-machine maintenance, de-scaling and sanitizing can be a tedious, expensive, and time consuming process. Ice-O-Matic tackles this problem head-on in its Elevation Series Ice Makers, which features a one-touch system that makes routine maintenance a snap. To see this quick and easy process in action, watch along with this demonstration of the de-scaling and sanitizing system in Elevation Series Ice Makers.
Transcript
When it is time to de-scale and sanitize your Elevation Series machine, any qualified service technician will be able to get your machine safe and clean faster than any machine before. The front panel can be removed easily with a Phillips-head screwdriver. From the off mode, press the clean button to begin the de-scaling and sanitizing process. Remove top cover and splash guard to easily access the curtain and water reservoir. Once water starts circulating, add de-scaling solution per manufacturer's instructions. Re-install splash guard and top cover to keep splashing at a minimum and conserve chemicals.
Ice-O-Matic Elevation Series Ice Makers
Built in Agion® heightens antimicrobial protection and One-Touch Cleaning makes sanitizing and descaling the ice maker incredibly easy.
Check it outDe-scaling takes approximately 25 minutes. Once complete, the Elevation Series machine automatically shuts off, indicated by a solid red and a solid yellow LED. To finish de-scaling, simply push the clean button to end. Now that you've completed the initial de-scaling process, it's time to finish cleaning the Elevation machine by sanitizing. To sanitize, begin in the red off state and simply repeat all the steps you've just seen to de-scale. The only difference is this time, you'll add a nickel-safe sanitizing solution to the sump per manufacturer's instruction. When you finish de-scaling and sanitizing, simply wipe down the surrounding areas with a clean rag. Return to freeze mode by pressing the power button.
